MANNOL 9900 Motor FlushOil additives > AdditivesMotor Flush is a Special cleaner for removing sediments, dirt, sludge and wear products of engine parts, including the most inaccessible elements of the oil system. Product properties: - Cleans the oil system and filter nets of oil pumps. During the washing process, it provides reliable lubrication, preventing wear of engine parts. Due to the unique composition of detergent-dispersing additives, it guarantees highly effective and safe removal of carbon deposits, including from the bottom of the piston; - Removes both oil-soluble and non-oil-soluble contaminants; - Cleaning is gentle for all parts and components of the engine and does not harm them; - Neutral to the seals used; - It is miscible with all types of engine oils (mineral and synthetic, etc.) and can be used for flushing any gasoline and diesel engines with or without turbocharging, with or without exhaust gas cleaning systems; - Completely removed from the system along with old oil. Application: at the operating temperature of the engine, add the contents of the container to the used engine oil before replacing it. After 10 minutes of engine idling, drain the used oil, replace the filter and fill in the new oil (you CAN't DRIVE the CAR UNTIL THE new OIL is FILLED in!). Fill the additive into the engine oil tank with the old engine oil under operating temperature. Let the engine run for 10 minutes in the idle mode, afterwards drain the old engine oil and change the oil filter. Fill the engine with new engine oil. The contents of the packaging is sufficient for washing an engine oil system with a volume up to 6 L. Not suitable for motorcycles with wet clutch systems. 350ml (9900) 
|
