MANNOL 9423 Oil Leak-Stop

Oil additives > Leak-Stop additives

Oil Leak-Stop is a special engine oil additive made by using unique technologies. Compatible with any engine oil and suitable for any type of engine. Recommended for extreme operating conditions, high oil consumption and unstable engine operation.

Properties:
- Modifies the surface structure of piston rings and hydro-compensators;
- Restores elasticity of seals and gaskets;
- Reduces oil flow through the piston rings by maintaining the oil viscosity at the required level.

Application: Add to the engine oil at any time. Warm the engine up and let it run idle for 10 minutes. The sealing effect is achieved after 600-800 km. For a long-term effect, apply at every oil change. A can of 300 ml is enough for a 6 L oil system.
Note: Do not use in motorbikes with a wet clutch.

A 300 ml can of Oil Leak-Stop is sufficient for up to 6 l of engine oil. It may be added at any time, warm up the engine after adding the product. The sealing effect occurs only after 600-800 km. To ensure a long-term success of the effect apply Oil Leak-Stop after every oil change. Note: Do not use in motorcycles with clutches in oil baths!

Oil Leak-Stop is a special engine oil additive made by using unique technologies. Compatible with any engine oil and suitable for any type of engine. Recommended for extreme operating conditions, high oil consumption and unstable engine operation.

Properties:
- Modifies the surface structure of piston rings and hydro-compensators;
- Restores elasticity of seals and gaskets;
- Reduces oil flow through the piston rings by maintaining the oil viscosity at the required level.

Application: Add to the engine oil at any time. Warm the engine up and let it run idle for 10 minutes. The sealing effect is achieved after 600-800 km. For a long-term effect, apply at every oil change. A can of 300 ml is enough for a 6 L oil system.
Note: Do not use in motorbikes with a wet clutch.
Oil Leak-Stop is a special engine oil additive made by using unique technologies. Compatible with any engine oil and suitable for any type of engine. Recommended for extreme operating conditions, high oil consumption and unstable engine operation.

Properties:
- Modifies the surface structure of piston rings and hydro-compensators;
- Restores elasticity of seals and gaskets;
- Reduces oil flow through the piston rings by maintaining the oil viscosity at the required level.

Application: Add to the engine oil at any time. Warm the engine up and let it run idle for 10 minutes. The sealing effect is achieved after 600-800 km. For a long-term effect, apply at every oil change. A can of 300 ml is enough for a 6 L oil system.
Note: Do not use in motorbikes with a wet clutch.

300ml (9423)