Press Releases
SCT ESTER Technology
More details ...
Dates & Events
Automechanika Frankfurt 2021
More details ...
Products > Maintenance products > Glues & repair sets for plastic parts


Glues & repair sets for plastic parts


MANNOL 2K-PUR is a two-component adhesive for structural and cosmetic repair of plastic parts, metal, wood, stone etc. Final curing occurs within 2-3 hours at room temperature. The adhesive sustains elasticity in the long term, does not form sediment, is weatherproof and resistant to ageing. Keep this product tightly closed in the original packaging in a dry place at temperatures from +5 to +25 °C.

In order to achieve an optimal adhesive result, the surfaces must be clean and free of grease. Some surfaces must be roughened. Squeeze adhesive out of the double syringe and stir well both components with an applicator. Apply the adhesive and bond the parts together (max. processing time 4-6 minutes). Hand-tight after approx. 8-10 minutes. Completely cured after 2-3 hours. Curing times are dependent on the room temperature. Do not use the product at temperatures below 0 °C. After use close the package with the cap again. Keep in a cool and dry place.

Product Characteristics:
Characteristics Method Unit Value
01. Viscosity at -25 °C N/mm2 0,015-0,020
02. Mixing ratio 1:1
03. Colour gray/black
04. Surface dry time min 4-6
05. Specific weight g/cm³ 1,30
06. Temperature resistance °C up to max. 150
07. Final strength h 2-3
08. Hardness Shore A ASTM D 2240 78-80
09. Shearing strength N/mm2 3-5
10. Thermal conductivity W/m∙K 0,1
11. Thermal expansion coefficient 1/K 60 – 120 x 10E6
12. Dielectric strength kV/mm 50-90
13. Special resistance Ohm∙cm 3 – 5 x 10E12

The data provided is based on standard laboratory tests and given only as a reference. The indicators can vary within the permissible range.

30g (9918)